Wednesday, May 2, 2018

How To Install 4 Satellites With One Dish.

STEVOMULTISERVICE

With the help of 90cm sized satellite dish, you can track the following four satellites with a single dish;
1) Nigcomsat 42°E (Freq 12518, Pol H, SR 29500).
2) Eutelsat 36°E (Freq 11938, Pol H,  SR 27500).
3) Astra 2F 28.2° E (Freq 12524, Pol V, SR 30000).
4) Yamal 54.9° E (Freq 11008, Pol V,  SR 05000).

           Image of 4 satellites in one dish.

First of all you will track 42° with your 90cm dish. With this satellite, you need a very high quality lnbf before you can get the signal.

Standing in front of the dish,take another lnbf and start finding signal for 36° at the right side of the lnbf bar.

If you are done with this, take another lnbf and start finding signal for 28° below the 36°satellite lnbf and tie it with hard cable.

The last work is how you are going to track 54.9°. Before, take another lnbf and twist a satellite cable around it as shown in the image below; 
Image of satellite cable twisted around lnbf.

the height of the lnbf and the cable should be about 30cm.
Place this lnbf on the left side of the initial lnbf in lnbf holder by standing in front of the dish as you can see from the first image.

 Start finding the signal for Yamal 54.9°east and you are done with 4 satellites with a single dish. Your good work will be like first image in this post. 

To have an excellent result for your work, you must use only high quality lnbf for all the four sat.