These are TV channels that have began transmission on the following satellites so if your dish is facing some of these directions, kindly rescan your receiver with these transponders;
*35 MM TV has began transmission on Astra 5B at 31.5°E with freq(12110), pol(H), sr(27500).
*COMPLEX 1 TV has also began transmission on Paksat IR at 38°E Cband with freq(4037), pol(V), sr(4800).
*ANGEL TV PORTUGUESE has also began transmission on Intelsat 34 at 55.5°W with freq(4124), pol(H), sr(1667).
*WAAR TV is also on HOTBIRD 13C at 13°E with freq(11373), pol(H), sr(27500).
Sunday, June 3, 2018
HOW TO SOLVE NO VIDEO PROBLEMS OF SOME OF YOUR SATELLITE TV CHANNELS.
Sometimes some of your satellite TV channels will display some of the following messages when you try to watch;
No Audio or Video, Service Not Available, No Service, etc..
If you know the signal quality of your satellite is OK and you see those messages, it could be that, the channel is temporary unavailable or closed down, it can also be that the system or the video format of that particular channel has been changed.
Example, if a channel changes its video format from MPEG 2 or MPEG 4 to HD (High Definition), it will not be accessible on the MPEG 2 or MPEG 4 anymore. In this case you have to get an HD decoder before you can access the channel since HD decoder support all the video formats.
Another measure you can take to solve this is by rescaning your receiver because it could be that the transponder, VPID or APID of the channels has been changed.
It will be good enough to restore the decoder before scanning.
By taking all these measures and the problem still persist, then it could be that the channel is completely unavailable.
11 DAYS LEFT FOR THE RUSSIA 2018 WORLD CUP TO BEGIN. KEEP CONNECTED WITH ME FOR ALL THE UPDATES.
No Audio or Video, Service Not Available, No Service, etc..
If you know the signal quality of your satellite is OK and you see those messages, it could be that, the channel is temporary unavailable or closed down, it can also be that the system or the video format of that particular channel has been changed.
Example, if a channel changes its video format from MPEG 2 or MPEG 4 to HD (High Definition), it will not be accessible on the MPEG 2 or MPEG 4 anymore. In this case you have to get an HD decoder before you can access the channel since HD decoder support all the video formats.
Another measure you can take to solve this is by rescaning your receiver because it could be that the transponder, VPID or APID of the channels has been changed.
It will be good enough to restore the decoder before scanning.
By taking all these measures and the problem still persist, then it could be that the channel is completely unavailable.
11 DAYS LEFT FOR THE RUSSIA 2018 WORLD CUP TO BEGIN. KEEP CONNECTED WITH ME FOR ALL THE UPDATES.
Subscribe to:
Posts (Atom)