How To Add Biss Key To Super Box Decoder.

1) To add biss and powervu keys into super box receiver, press menu on your remote control and scroll to the down icon which is multimedia.
Press OK on multimedia and type 1506 or 1505 and you will see Patch, Sharing, DQCAM and TCAM under the (Multimedia Setting.

Press OK on patch and you will see all the patch menu. You can add or edit what you want to add.

You can also use the above process for Wise Tech HD decoder 2018 and 2019 edition.

Also most decoders that have a display like the image below also uses this same process as super box.

            Image displaying biss keys menu.

       Image displaying powervu keys menu.

2) For Multitv Syndicated Capital decoder both ash and black colors,
Press menu then press 0000 and the biss key option will pop up. If the biss key option does not pop-up then you have to run latest software on it.

3) For Multitv HD,
Press menu then click on 8888 the patch menu will appear, then keep on pressing the blue button for biss key option to appear then press OK on one to edit it.

4) For strong receivers such as SRT 4950H, 4950E, 4955, 4955B, 4955C, 4955G, first of all you will need to run patch software on it before you can access the biss key option.
After that,
Press F1 followed by 8280 and you will see the patch menu on your screen.
If the patch menu did not appear on your screen, then press 6969 and then 6969 again to enable the patch menu and start the process again by pressing F1 followed by 8280.

5) For SRT 4669X, SRT 4669XII, SRT4922, SRT4922A etc. you will first of all need to run patch software and then press 6969 and then 6969 again to enable the patch menu if it has been disabled.
Then press 8280 for the biss menu to appear then edit the first 16 digits of one of the biss keys that has pop up on your screen press exit and save.

6) For most New Max decoders, Press menu and then 8888.

7) For most WIZ TECH decoders, press menu and go to Tools then press OK on Info or Information and then press 8888 for the biss key menu.

8) For Champion TV old decoder,
Switch to the channel you want to to open and then press 0000 for the biss key menu then edit the first line and save.

NOTE: In most cases the scrambled channel you want to open with biss key will not open unless you do factory restore the decoder and then rescan the channel and re-enter the biss key.

If you need further assistance you can send your queries to :
originalmech13@gmail.com or phone on
+233508590634, +233553324606.

You can also subscribe from the email subscription form on this site to receive every update that will be published here through your email address.